Installation Manual
RC-4 Relä – Installation Manual
© 2021 Alarmtech – www.alarmtech.se 1 / 2 RC1234 datasheet 2123ense Systems Relay Unit Datasheet and mounting instruction RC1, RC2, RC3, RC4
DESCRIPTION
RC1 and RC2 have one change over contact. RC3 and RC4 have
2 change-over contacts. All ha ve a high impedance input ON
to control the relay. If the control input is connected to minus the relay is energised and a LED indicate. RC1 ha ve wires at the input . RC2 and RC3 have a 3 input terminal block . RC4 have 3 input for control and DC supply and 2 terminals for AC supply.
JUMPER FUNCTION
S1 inserted – relay is controlled by the supply voltage 10-30 V DC (11 – 30 V DC or AC in RC4) S1 open – relay is supplied with DC (DC or AC in RC4) and controlled by connecting ON input to (-)
MOUNTING INSTRUCTION
RC1 is mounted with the doubl e-sided tape. RC 2, RC 3, RC 4 is delivered mounted on a plate with double -sided tape. The strap is placed in the white marking on the PCB and must not cross over the relay which is mechanical sensitive.
ORDER CODE
Relay unit RC1 E-nr 6332877 RC1 Relay unit RC2 E-nr 6332878 RC2 Relay unit RC3 E-nr 6332879 RC3 Relay unit RC4 E-nr 6309547 RC4
TECHNICAL SPECIFICATION
Unit RC1 RC2 RC3 RC4 Relay SPDT DPDT DPDT Input 3 x 15 cm wires 3 screw terminals 3+2 screw terminals Output 3 screw terminals 6 screw terminals Contact rating 1 A / 30 V 2 A / 30 V Supply voltage 10 – 30 VDC 11 - 30 V DC or AC Supply current, relay not energized Max. 2.5 µA (12 V) Max. 5 µA (30 V) Supply current, relay energized
16 mA (12 V)
20 mA (30 V)
16 mA (12V)
21 mA (30V)
Control current 1.2 mA (12 V) 2.6 mA (30 V) 1.9 mA (12 V) 5.1 mA (30 V) Dimensions [mm] 37 x 21 43 x 29 48 x 29 Weight 20 g 25 g 30 g 55 g Jumper N/A Yes Jumper function ON – relay controlled by supplying voltage OFF – relay controlled by ON input Mounting Self-adhe- sive tape Self-adhesive plastic holder Operating temperature -20 °C to +50 °C Compliance We reserve the rights to changes without notice
NC C NO+- ON
S1
21 37
NC C NO+- ON
21 37
RED
YELLOW
BLACK
43 29
RC3 NC1 NO1 C2 NC2 NO2C1
NO- +
S1
10k Relay
LED
CONTROL UNIT
(-) (+)
ON
NC C NO
RC 1
10k Relay
LED
(+)
ON
(-)
S1
CONTROL UNIT
NC C NO
RC 2
10k Relay
LED
(+)
ON
(-) S1
CONTROL UNIT
C1 NO1NC1 C2 NO2NC2
RC 3
10k Relay
LED
(+)
ON
(-)
S1
CONTROL UNIT
C1 NO1NC1 C2 NO2NC2
AC AC
RC 4
48 29
AC AC NC2 C2 NO2
- ON + NC1 C1 NO1
© 2021 Alarmtech – www.alarmtech.se 2 / 2 RC1234 datasheet 2123ense Systems Relämoduler Datablad och installationsmanual RC 1, RC 2, RC 3, RC 4
BESKRIVNING
RC 1 - 4 är små universella reläkort som passar till de flesta typer av säkerhets installationer (inbrottslarm, passagesystem, brandlarm mm) . RC 1 och RC 2 har växlande relä. RC 3 och RC 4 har ett dubbelt växlande relä. Alla har en högohmig styringång som kontrollerar relä et. Om styringången (ON) ansluts till (-) drar reläet. Aktivt relä indikeras med att lysdioden tänds. RC 1 har trådanslutning för relästyrning. RC 2 och RC 3 har en 3 polig skruvplint. RC 4 har en 3 polig skruvplint för DC matning och styrning samt en 2 polig för växelströmmatning.
JUMPER FUNKTION
S1 insatt - reläet styrs med matningsspänningen
10 - 30 V (RC4: 11 - 30 V DC eller AC)
S1 öppen - reläet matas DC (RC4: AC eller DC) och styrs med en slutning mellan den högohmiga ingången ON och (-)
MONTERING
RC 1 monteras med en fästkudde. RC 2 och RC 3 monteras med en strap på en plastplatta som har dubbelhäftande tejp. Strapen får inte gå över reläet som är känsligt för mekanisk påverkan, utan skall läggas i det markerade spåret. Relämodulerna RC 2, RC 3, RC 4, levereras monterade på plastfot med dubbelhäftande tape.
BESTÄLLNINGSNUMMER
Relämodul RC1 E-nr 6332877 RC1 Relämodul RC2 E-nr 6332878 RC2 Relämodul RC3 E-nr 6332879 RC3 Relämodul RC4 E-nr 6309547 RC4
TEKNISKA DATA
Relämodul RC 1 RC 2 RC 3 RC4 Relä Växlande Dubbelt växlande Dubbelt växlande Ingångar 15 cm tråd 3 x skruvplint 3 + 2 skruvplint Utgångar 3 x skruvplint 6 x skruvplint Reläkontakter 30 VA, 30 V DC/AC, 1 A 2 A / 30 V Inspänning 10 – 30 V DC 11 – 30 V DC eller AC Strömförbruk- ning, relä inte aktiverat Max. 2.5 µA (12 V) Max. 5 µA (30 V) Strömförbruk- ning, relä aktiverat
16 mA (12 V)
20 mA (30 V)
16 mA (12 V)
21 mA (30 V)
Styrström 1.2 mA (12 V) 2.6 mA (30 V) 1.9 mA (12 V) 5.1 mA (30 V) Storlek [mm] 37 x 21 43 x 29 48 x 29 Vikt [g] 20 25 30 55 Jumper N/A Ja Jumper funktion ON - Reläet styrs med matningsspänningen OFF - Reläet styrs med ON ingången Fastsättning Fästku dde Plastfot med självhäftande tejp Temperatur- område -20 till +50oC Normer
NC C NO+- ON
S1
21 37
NC C NO+- ON
21 37
RED
YELLOW
BLACK
43 29
RC3 NC1 NO1 C2 NC2 NO2C1
NO- +
S1
10k Relay
LED
CONTROL UNIT
(-) (+)
ON
NC C NO
RC 1
10k Relay
LED
(+)
ON
(-)
S1
CONTROL UNIT
NC C NO
RC 2
10k Relay
LED
(+)
ON
(-) S1
CONTROL UNIT
C1 NO1NC1 C2 NO2NC2
RC 3
10k Relay
LED
(+)
ON
(-)
S1
CONTROL UNIT
C1 NO1NC1 C2 NO2NC2
AC AC
RC 4
48 29
AC AC NC2 C2 NO2
- ON + NC1 C1 NO1
Källdokument: Installmanual_Alarmtech_RC-4 Relä.pdf