Manual
TL10 – Manual
359246_MANUAL_INSTRUCTIONS_TL10_REV4 0_ENG.doc Page 1 of 1 OUTDOOR ACOUSTIC ALARM DEVICE mod. TL 10 Technical specifications : Battery supply mode Exte rnal supply mode Voltage supply : 12,5 V dc : 12,5 V dc Voltage range : 10 min - 15 max V dc : 10 min - 15 max V dc Voltage recharging : 12,5 - 13,8 V dc : / Control current : 1 mA : / Current consumption stand by : 0,8 mA : / Current consumption in alarm : 0,95 A : 0,95 A Modulation : trapez. : trapez. Lower frequency : 1600 Hz : 1600 Hz Higher frequency : 2550 Hz : 2550 Hz Modulation frequency : 1,5 Hz : 1.5 Hz Timer : see Dip switch chart : / Temperature range : - 25° C +65° C : -25° C +65° C Max dimensions battery : 12V / 1Ah : / Dimensions : 135 x 220 x 85 mm : 135 x 220 x 85 mm Weight : 1,730 Kgs : 1,730 Kgs Protections : - Against reverse polarity of battery - Against rev erse polarity of - Against reverse polarity of external extern al supply battery charger - Against cutting of connecting wires - Against reverse polarity of control - Against op ening of box and removal - Against cutting of connecting wires of the sir en from the wall - Against opening of box and removal of the siren from the wall
OFF ON
DIP 1: Alarm: 3 minutes Alarm: 8 minutes DIP 2: Duration of the alarm set by DIP1 Alarm: in finitive DIP 3: Start by missing positive with battery Star t by “launch” supplying to give, without battery DIP 4: High Volume Low Volume DIP 5: Sound type 1 Sound type 2
ATTENTION
1. When the siren is powered after a complete disconnection from battery and recharge, at the faston
terminals for battery connection there will be 0V as in the first 10 seconds the board checks if the battery is at least 4V (battery present) and the fastons are connected correctly (red with the + and black with the -). At the end of the test there will be the power to recharge the battery. This test is repeated every 24 hours.
2. If the battery voltage is lower than 10.5V the LEDs flash quickly in case of alarm or with input 5 at 12V.
359246_MANUAL_INSTRUCTIONS_TL10_REV4 0_ENG.doc Pa ge 2 of 2 The European directive "Waste Electrical and Electr onic Equipment (WEE) aims to minimize the impact of electrical and electronic equipment waste on the environment and human health. To conform with the d irective, electrical equipment marked with this symbol must not be dispo sed of in European public disposal systems. European users of electrical equipment must now return end-of-life equipment for disposal. Further information can be found on the following website: http://www.recyclethis.info/. BATTERY SUPPLY MODE Positive control
REMOTE SUPPLY MODE
Wiring connections
BATTERY SUPPLY MODE Negative control